This system is complete for installation
What you get:
Flush mounted doorbell x 1; surface mounted home station x 1; power supply-audio controller with mounting case x 1
Stainless Steel flush mounted Door Station
3 mm thick, ground stainless-steel front panel of high-quality Nirosta V2A stainless steel. This makes it especially resistant to environmental influences and vandalism.
� Screwless installation system. Unlocking is carried out with a special opening tool included with the product.
� Depth of flush-mounted box: 40 mm
� Flush-mounted box with wall anchors and openings for cable feed.
� Special design principle of the loudspeaker and microphone for avoidance of vandalism and moisture penetration. Due to the design used, it is not possible to puncture the loudspeaker or microphone with a sharp object.
� Hands-free feature (voice-controlled talk-back with echo and background noise suppression)
� Adjustable speech volume.
� Vandalism-protected stainless-steel call buttons. These are recessed flush in the front panel and have a precise switching behaviour when a call button is pressed.
� Acoustic acknowledgement signal when call button is pressed (can be deactivated if necessary).
� Night design of stainless-steel call buttons. Illumination with white LED illumination.
� The inscription area or the name plates are uniformly illuminated with maintenance-free, energy-saving white LEDs.
� The cover windows for the name plates are recessed flush in the front panel and consist of shatter-proof, scratch-resistant, 5 mm thick safety glass. They are therefore especially impervious to vandalism in the form of impacts, fire, scratching etc. In addition, they are easy to clean when soiled.
� The name plates can be removed from the front without dismantling the door station stainless steel. The unlocking device of the name plates is concealed.
� The name plates are protected against sprayed water.
� The door station stainless steel is supplied ready for connection including built-in loudspeaker and, for larger buildings, including an expansion module. This eliminates time-consuming wiring of the call buttons. Only a Gira 2-wire bus is required for connection of the door station stainless steel.
� A catch strap and supporting surface in the flush-mounted box serve as mounting aids during installation.
� One-man commissioning through simple commissioning procedure.
� Circumferential sponge rubber seal for wall sealing on the underside of the front panel.
� Large coverage between flush-mounted box and masonry.
Surface mounted Home Station
Complete pre-assembled unit for surface mounted installation � Comes with Cover frame - 2-gang cover frame without crossbar � Power supply: 26V DC �2V (bus voltage) � Connections: 2 terminal screws for 2-wire bus, 2 terminal screws for level-call button � Dimensions (width x height x depth): 55 x 127 x 20 mm � Consists of: Operating buttons for hands-free feature Lousdpeaker speech insert 6-pole audio connection cable Door communication bus coupler � Operating buttons control the following functions: Switching of light and other functions in conjunction with switching actuator item 912.08.912 shown in Don't Forget to Order Control of the door opener Activation/deactivation of call tone Call acceptance Activation of the enforcement function Volume control of calling tone and speech volume � Features: Simple installation with pull-off screw terminals Simple removal of home station and cover frame during renovation work Mounting holes for wall and box installation Parallel connection of up to 3 home stations possible Unique calling tones for door call, level call and internal call Operating buttons with integrated LEDs for status display Hands-free feature (voice-controlled talk-back with echo and background noise suppression) Enforcement function for loud background noise during speech connection Eavesdropping prevention Temperature range: -5�C to +50�C � Made of thermoplas
Control device for the supply of the audio components of the Gira door communication bus.
The audio control device has the following product features:
� Supply of the reverse-polarity protected, short-circuit-proof 2-wire bus.
� Self-resetting electronic short-circuit and overload recognition of the operating voltage and the bus connection.
� Push buttons for system and door opener programming.
� LED status indicators for operation, overload, system programming and door opener programming.
� Up to 32 devices (home station, door station, switching actuator) can be connected.
� 12 V AC output (1 - 10 s) to supply power to a standard door opener (max. power consumption 1.6 A).
� Permanent 12 V AC output to supply power to the TC gateway 1290 00.
� Relay output for switching a door opener with its own power supply.
� Door-opener switching time continuously adjustable from 1 s to 10 s.
The audio control device is intended to be installed in the subdistribution unit. If this is not possible, use a common surface mounted distributor.
Primary rated voltage: 230 V AC, 50 Hz
Secondary rated voltage: SELV 26 V DC �2 V
Secondary rated current: 160 mA continuous load
550 mA peak load (max. 5 seconds)
Overload deactivation from 350 mA
Screw terminals: 0.6 mm to 2.5 mm�
Door opener output: 12 V AC, 1.6 A
Relay output: 30 V AC/DC, 2 A
Cable length from control device to most
max. 300 m with 0.8 mm cable o
max. 170 m with 0.6 mm cable o
Dimensions: DRA device with 6 modules
Temperature range: -5 �C to +45 �C
Protection type: IP 20
Door communication gateway for connection of Gira door communication system with an existing telephone system. � Door communication gateway is simply connected between the telephone connection and an analogue telephone. Telephone calls can be carried out on the existing telephone as usual. In addition, door calls are forwarded by the Gira door communication system to the telephone. It is then possible to speak to the person at the front door and the door opener can be activated via the telephone keypad. In addition, door calls can be forwarded to an answering machine or a mobile phone. � Intended for installation in the sub-distribution unit. If this is not possible, a common surface-mounted distributor should be used. � The TC-gateway is supplied with power via Video Controller device. � This component enables door communication systems with more than 30 devices to be set up � Connections: two screw terminals for 2-wire bus, 2 screw terminals for exchange connection a/b, 2 screw terminals for device a�/b� , 2 screw terminals for power supply 12V, AC/24V DC � Dimensions: DRA device, with 6 modules
Requires 2 wire bus cable only. Maximum distance 80 m with 0.8 mm cable; 50 m with 0,6 mm cable