This system is complete for installation
What you get:
Flush mounted doorbell x 1; flush mounted home station x 1; power supply-audio controller with mounting case x 1
Stainless Steel flush mounted Door Station
3 mm thick, ground stainless-steel front panel of high-quality Nirosta V2A stainless steel. This makes it especially resistant to environmental influences and vandalism.
� Screwless installation system. Unlocking is carried out with a special opening tool included with the product.
� Depth of flush-mounted box: 40 mm
� Flush-mounted box with wall anchors and openings for cable feed.
� Special design principle of the loudspeaker and microphone for avoidance of vandalism and moisture penetration. Due to the design used, it is not possible to puncture the loudspeaker or microphone with a sharp object.
� Hands-free feature (voice-controlled talk-back with echo and background noise suppression)
� Adjustable speech volume.
� Vandalism-protected stainless-steel call buttons. These are recessed flush in the front panel and have a precise switching behaviour when a call button is pressed.
� Acoustic acknowledgement signal when call button is pressed (can be deactivated if necessary).
� Night design of stainless-steel call buttons. Illumination with white LED illumination.
� The inscription area or the name plates are uniformly illuminated with maintenance-free, energy-saving white LEDs.
� The cover windows for the name plates are recessed flush in the front panel and consist of shatter-proof, scratch-resistant, 5 mm thick safety glass. They are therefore especially impervious to vandalism in the form of impacts, fire, scratching etc. In addition, they are easy to clean when soiled.
� The name plates can be removed from the front without dismantling the door station stainless steel. The unlocking device of the name plates is concealed.
� The name plates are protected against sprayed water.
� The door station stainless steel is supplied ready for connection including built-in loudspeaker and, for larger buildings, including an expansion module. This eliminates time-consuming wiring of the call buttons. Only a Gira 2-wire bus is required for connection of the door station stainless steel.
� A catch strap and supporting surface in the flush-mounted box serve as mounting aids during installation.
� One-man commissioning through simple commissioning procedure.
� Circumferential sponge rubber seal for wall sealing on the underside of the front panel.
� Large coverage between flush-mounted box and masonry.
Flush mounted Home Station
The hands-free feature home station offers the following product features:
� Uniform installation of door communication and electrical installation in the 58 mm flush-mounted box.
� Design variety via integration into the switch range, allowing uniform appearance of door communication and electrical installation.
� Signal transfer and supply of the audio and video components via reverse-polarity-protected and short-circuit-proof 2-wire bus.
� Modular structure, therefore simple installation and expandable with further components such as call button for home stations, TFT colour display etc.
� Parallel connection of up to 3 home stations possible.
� One-man commissioning through simple commissioning procedure.
� Ringing tone differentiation for door call, floor call and internal call.
� Operating buttons with integrated LEDs for status display.
� Hands-free feature (voice-controlled talk-back with echo and background noise suppression).
� Enforcement function for loud background noise during the voice connection.
� Free intercom communication within the house in combination with the call button for home stations.
� Eavesdropping prevention.
� Selection of 5 different ringing tone melodies, which can be assigned to individual call buttons.
� Automatic door opener can be connected: With the function activated, the door opener is automatically operated after pressing the door-station call button.
� This component enables door communication systems with more than 30 devices to be set up.
The operating button of the hands-free feature home station controls the following functions:
� Switching light and other functions in conjunction with the switching actuator 1289 00.
� Operation of the door opener.
� Switching ringing tone on and off.
� Call acceptance.
� Activation of the enforcement function.
� Volume control of calling tone and speech volume.
Power supply: 26 V DC +/- 2 V (bus voltage)
Bus coupler connections: two screw terminals for 2-wire bus
two screw terminals for floor-call button
2 system bus connector strips
1 video connector strip
Speech insert connections:2 system bus connector strips
Temperature range: -5 �C to +50 �C
Control device for the supply of the audio components of the Gira door communication bus.
The audio control device has the following product features:
� Supply of the reverse-polarity protected, short-circuit-proof 2-wire bus.
� Self-resetting electronic short-circuit and overload recognition of the operating voltage and the bus connection.
� Push buttons for system and door opener programming.
� LED status indicators for operation, overload, system programming and door opener programming.
� Up to 32 devices (home station, door station, switching actuator) can be connected.
� 12 V AC output (1 - 10 s) to supply power to a standard door opener (max. power consumption 1.6 A).
� Permanent 12 V AC output to supply power to the TC gateway 1290 00.
� Relay output for switching a door opener with its own power supply.
� Door-opener switching time continuously adjustable from 1 s to 10 s.
The audio control device is intended to be installed in the subdistribution unit. If this is not possible, use a common surface mounted distributor.
Primary rated voltage: 230 V AC, 50 Hz
Secondary rated voltage: SELV 26 V DC �2 V
Secondary rated current: 160 mA continuous load
550 mA peak load (max. 5 seconds)
Overload deactivation from 350 mA
Screw terminals: 0.6 mm to 2.5 mm�
Door opener output: 12 V AC, 1.6 A
Relay output: 30 V AC/DC, 2 A
Cable length from control device to most
max. 300 m with 0.8 mm cable o
max. 170 m with 0.6 mm cable o
Dimensions: DRA device with 6 modules
Temperature range: -5 �C to +45 �C
Protection type: IP 20
Door communication gateway for connection of Gira door communication system with an existing telephone system. � Door communication gateway is simply connected between the telephone connection and an analogue telephone. Telephone calls can be carried out on the existing telephone as usual. In addition, door calls are forwarded by the Gira door communication system to the telephone. It is then possible to speak to the person at the front door and the door opener can be activated via the telephone keypad. In addition, door calls can be forwarded to an answering machine or a mobile phone. � Intended for installation in the sub-distribution unit. If this is not possible, a common surface-mounted distributor should be used. � The TC-gateway is supplied with power via Video Controller device. � This component enables door communication systems with more than 30 devices to be set up � Connections: two screw terminals for 2-wire bus, 2 screw terminals for exchange connection a/b, 2 screw terminals for device a�/b� , 2 screw terminals for power supply 12V, AC/24V DC � Dimensions: DRA device, with 6 modules
Requires 2 wire bus cable only. Maximum distance 80 m with 0.8 mm cable; 50 m with 0,6 mm cable