System so far includes
• 1 x VELA 5-inch video monitor
• 1 x Power supply Model 4001
Now, complete your System: Pick your Doorbell - the options are below
VELA 5-inch Acrylic glass finish monitors. Half Duplex. Handsfree. Colour Video
• Monitor finish: acrylic glass
• Dimensions: W220 x H150 xD 25mm
• Mounting type: surface mount
• Resolution 480x234 pixels
• Ding-Dong ringtone
• Check outside and talk to people outside at any time you wish to, even if no one rings the bell
• Does not have Intercom function
Choose from these 2 Doorbells
Model A- Slimline stainless steel surface mount Video Doorbell
• Finish:stainless steel
• Dimensions: W56 x H134 x D46mm
• Mounting type: Surface mount
• Comes with rain cover
• Connect directly to an electric or electro-magnetic lock
• Viewing angle: 87-degree wide-angle camera, non-adjustable
• Night vision
Model B- Flush mount Video Doorbell with Proximity Reader
• Finish: 3mm stainless steel
• Dimensions: W150 x H272 x D68.5mm
• Mounting type: Flush mount, comes with wall box
• Built-in Proximity reader. Comes with 5 keyfobs
• 'Talking' feature - a voice tells you what the unit is doing
• Connect directly to an electric or electro-magnetic lock
• Viewing angle: 87-degree wide-angle camera, Adjustable
• Night vision
Model 4001
• AC multi power transformer
• Input: AC180V~ 270V 50~60Hz
• Output: DC 35V 1.4A
• Can power system up to 4 x monitors
NOTE • For distances over 50m, 2 x power supplies might be needed. 100m maximum distance doorbell to monitor
CAT-5/CAT-6
• Requires CAT-5E or CAT-6 cable for distances up to a 50 metres (up to 100m with additional power supply)
• Audio Phones - 3 x additional Audio Phones can be added • Remember to add a distributor Model 4110S if you add any additional audio phones (1-3) • Please note - it is not possible to open a lock via the audio phone in this configuration
• Door Strikes and Bolt Locks - electric locks which you can open from your monitor. Requires 12V power supply
• Exit Buttons - You will need one of these inside your property if you have an electric lock
• Standalone Keypad - with this device you can have keyless entry to your house. Up to 250 people can have their own pin code. Requires 12V power supply
• Standalone Proximity Reader - provides keyless entry to house. Open lock by holding key fob or card in front of the reader. Requires 12V power supply
• Proximity Key Fobs and Proximity Cards - you will only need these if you add Proximity Reader